power entry modules without line filter gsf www.schurter.com/pg0 5 connectors iec appliance inlet c14 with fuseholder 1- or 2-pole screw-on version pick & place version c14 70 c description - panel mount: sandwich/rear-side - 2 functions: appliance inlet protection class i, with or without fuseholder for fuse- links 5 x 20 mm on the rear-side 1- or 2-pole - for pcb mounting - pick and place version approvals - vde certificate number: 40024857 - ul file number: e93617, e96454 - csa file number: 38456 characteristics - pcb mount with snap-in or screw-on feet suitable for automatic pcb assembling - all single elements are already wired - fuseholder on the inside of the equipment prevents accidental use of incorrect fuse-links by the user - with or without rear-side insulation cover blister tray meets esd requirements - qualified for use in equipment according iec/en 60950 other versions on request - ground terminal with quick-connect terminal 6,3 x 0,8 mm - ground terminal with solder terminal - for protection class ii references weblinks pd f , general product informatio n , approval s , roh s , china-roh s , mating connector s , e-stor e , schurter-stock-chec k , distributor- stock-chec k , accessorie s newly available variants corresponding to v-lock mating cordset. the connector is equipped with a notch intended for use with the latching cordset. the cord latching system prevents against accidental removal of the cordset. technical data ratings iec 10 a / 250 vac; 50 hz ratings ul/csa 10 a / 250 vac; 60 hz dielectric strength > 3 kvac between l-n > 4 kvac between l/n-pe (1 min/50 hz) allowable operation temp. -25 c to 70 c degree of protection from front side ip 40 acc. to iec 60529 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal for pcb mounting panel thickness s snap-in: 1.5/2/2.5/3 mm material: housing thermoplastic, black, ul 94v-0 appliance inlet c14 acc. to iec/en 60320-1, ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 10 a, protection class 1 fuseholder optional, 1 or 2 pole, shocksafe cate - gory pc2 acc. to iec 60127-6, for fuse-links 5 x 20 mm rated power acceptance @ ta 23 c 5 x 20: 3.15 w (1 pole)/ 2.5 w (2-pole) per pole power acceptance @ ta > 23c admissible power acceptance at hig - her ambient temperature see derating curves
power entry modules without line filter gsf www.schurter.com/pg0 5 connectors dimensions 21.9 12 29.9 34 24.45 11.5 15.9 19.3 6 a s 19.35 1.5 a = 6 mm for standard versions a = 5 mm for pick and place versions s = 0 mm for mounting from rear-side with insulation cover 26.8 25.5 22.3 30.3 max. r4.5 0.1 0.1 for mounting from rear-side 27.5 27 a = 6 mm for standard versions a = 5 mm for pick and place versions 19.7 27.7 max. r2 0.1 0.1 for sandwich mounting drilling diagrams without fuseholder 27 9.9 1.6 18.1 1.4 d1 d1 for snap-in mounting = 6 0.05 d1 for self-tapping screw = 3.6 0.1 with 1-pole fuseholder 27 9.9 1.6 12.7 9.05 1.4 d1 5.5 d1 for snap-in mounting = 6 0.05 d1 for self-tapping screw = 3.6 0.1 with 2-pole fuseholder 27 9.9 1.6 25.4 1.4 d1 5.5 d1 for snap-in mounting = 6 0.05 d1 for self-tapping screw = 3.6 0.1 pick and place versions without / with 1-pole or 2-pole fuseholder 2.3 2.3 10.9 2.5 1.6 25.4 1.4 3.5 5.8 6.5 1* 26.7 1.6 1.6 0.10 0.10 0.05 0.05 0.05 0.05 1* only for protection class ii derating curves 1-pole admissible power acceptance in watt 0 2 0 4 0 6 0 8 0 1 00 1.5 1.0 0.5 0.0 2.5 3.15 2.0 i = < < i n i = 0.7 i n i = 1.0 i n ambient air temperature ta c 2-pole admissible power acceptance in watt per pole 1.5 1.0 0.5 0.0 2.5 2.0 0 2 0 4 0 6 0 8 0 100 i = < < i n i = 0.7 i n i = 1.0 i n ambient air temperature ta c
power entry modules without line filter gsf www.schurter.com/pg0 5 connectors variants mounting side panel mounting panel thickness s [mm] fuseholder ground terminal 4.8 x 0.8 mm ground terminal direction packaging order number sandwich screw 1.5 - l angled to pin axis - gsf1.0002.31 sandwich screw 1.5 - l straight - gsf1.0001.31 sandwich screw 2 - l angled to pin axis - gsf1.0002.41 sandwich screw 2 - l straight - gsf1.0001.41 sandwich screw 2.5 - l angled to pin axis - gsf1.0002.51 sandwich screw 2.5 - l straight - gsf1.0001.51 sandwich screw 3 - l angled to pin axis - gsf1.0002.61 sandwich screw 3 - l straight - gsf1.0001.61 sandwich screw 1.5 1-pole l angled to pin axis - gsf1.1002.31 sandwich screw 1.5 1-pole l straight - gsf1.1001.31 sandwich screw 2 1-pole l angled to pin axis - gsf1.1002.41 sandwich screw 2 1-pole l straight - gsf1.1001.41 sandwich screw 2.5 1-pole l angled to pin axis - gsf1.1002.51 sandwich screw 2.5 1-pole l straight - gsf1.1001.51 sandwich screw 3 1-pole l angled to pin axis - gsf1.1002.61 sandwich screw 3 1-pole l straight - gsf1.1001.61 sandwich screw 1.5 2-pole l angled to pin axis - gsf1.2002.31 sandwich screw 1.5 2-pole l straight - gsf1.2001.31 sandwich screw 2 2-pole l angled to pin axis - gsf1.2002.41 sandwich screw 2 2-pole l straight - gsf1.2001.41 sandwich screw 2.5 2-pole l angled to pin axis - gsf1.2002.51 sandwich screw 2.5 2-pole l straight - gsf1.2001.51 sandwich screw 3 2-pole l angled to pin axis - gsf1.2002.61 sandwich screw 3 2-pole l straight - gsf1.2001.61 sandwich snap-in 1.5 - l angled to pin axis - gsf1.0202.31 sandwich snap-in 1.5 - l straight - gsf1.0201.31 sandwich snap-in 2 - l angled to pin axis - gsf1.0202.41 sandwich snap-in 2 - l straight - gsf1.0201.41 sandwich snap-in 2.5 - l angled to pin axis - gsf1.0202.51 sandwich snap-in 2.5 - l straight - gsf1.0201.51 sandwich snap-in 3 - l angled to pin axis - gsf1.0202.61 sandwich snap-in 3 - l straight - gsf1.0201.61 sandwich snap-in 1.5 1-pole l angled to pin axis - gsf1.1202.31 sandwich snap-in 1.5 1-pole l straight - gsf1.1201.31 sandwich snap-in 2 1-pole l angled to pin axis - gsf1.1202.41 sandwich snap-in 2 1-pole l straight - gsf1.1201.41 sandwich snap-in 2.5 1-pole l angled to pin axis - gsf1.1202.51 sandwich snap-in 2.5 1-pole l straight - gsf1.1201.51 sandwich snap-in 3 1-pole l angled to pin axis - gsf1.1202.61 sandwich snap-in 3 1-pole l straight - gsf1.1201.61 sandwich snap-in 1.5 2-pole l angled to pin axis - gsf1.2202.31 sandwich snap-in 1.5 2-pole l straight - gsf1.2201.31 sandwich snap-in 2 2-pole l angled to pin axis - gsf1.2202.41 sandwich snap-in 2 2-pole l straight - gsf1.2201.41 sandwich snap-in 2.5 2-pole l angled to pin axis - gsf1.2202.51 sandwich snap-in 2.5 2-pole l straight - gsf1.2201.51 sandwich snap-in 3 2-pole l angled to pin axis - gsf1.2202.61 sandwich snap-in 3 2-pole l straight - gsf1.2201.61 rear-side screw 6 - l angled to pin axis - gsf1.0002.01 rear-side screw 6 - l straight - gsf1.0001.01 rear-side screw 6 1-pole l angled to pin axis - gsf1.1002.01 rear-side screw 6 1-pole l straight - gsf1.1001.01 rear-side screw 6 2-pole l angled to pin axis - gsf1.2002.01 rear-side screw 6 2-pole l straight - gsf1.2001.01 rear-side snap-in 6 - l angled to pin axis - gsf1.0202.01
4 power entry modules without line filter gsf www.schurter.com/pg0 5 connectors mounting side panel mounting panel thickness s [mm] fuseholder ground terminal 4.8 x 0.8 mm ground terminal direction packaging order number rear-side snap-in 6 - l straight - gsf1.0201.01 rear-side snap-in 6 1-pole l angled to pin axis - gsf1.1202.01 rear-side snap-in 6 1-pole l straight - gsf1.1201.01 rear-side snap-in 6 2-pole l angled to pin axis - gsf1.2202.01 rear-side snap-in 6 2-pole l straight - gsf1.2201.01 rear-side metal snaps 6 - l angled to pin axis blister tray gsf1.3402.01 rear-side metal snaps 6 1-pole l angled to pin axis blister tray gsf1.4402.01 rear-side metal snaps 6 2-pole l angled to pin axis blister tray gsf1.5402.01 insulation cover must be ordered separately. order no. 0098.0078 packaging unit 50 pcs accessorie s description assorted cover s rear cover 0098.0078 mating outlets/connector s category / description appliance outletoverview complet e iec appliance outlet f, screw-on mounting, front side, solder terminal 478 7 iec appliance outlet f, snap-in mounting, front side, solder or quick-connect terminal 478 8 iec appliance outlet f or h, screw-on mounting, front side, solder, pcb or quick-connect terminal 509 1 iec appliance outlet f or h, screw-on mounting, front side, solder or quick-connect terminal 509 2 appliance outletfurther types togsf 1 connectoroverview complet e iec connector c15, rewireable, straight 010 1 iec connector c15a, rewireable, straight 010 2 iec connector c15a, rewireable, straight 0102- g iec connector c15a, rewireable, angled 011 2 iec connector c13, rewireable, angled 401 2 connectorfurther types togsf 1 ... power cordoverview complet e power cord with iec connector c13, angled 031 1 power cord with iec connector c13, angled 301 1 power cord with iec connector c13, angled 301 2 power cord with iec connector c13, angled 301 3 power cord with iec connector c13 302 0 power cordfurther types togsf 1 ... the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|